Table of Contents
Advertisement
156 Climate control
156
Keep the air inlet free of residue build-up
R
(
page 319).
/
T T o open or close:
o open or close: hold air vent
#
centre and turn it to the le (open) or right
(closed) as far as it will go.
T T o se
o set t t the he air ow
air ow dir direction:
ection: hold air vent
#
the centre and move it up or down or to the
le or right.
A A djus
djusting t
ting the AIRSC
he AIRSCARF v
& W W ARNING
ARNING Risk of burns caused by the
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can ow from the outlet opening in the head
restraints.
Turn the heating output down in good
#
time.
Maintain a suitable distance from the
#
outlet opening.
1
in the
* N N O O TE TE Damage caused to AIRSCARF by
the use of protective covers
1
in
If a protective cover is placed over the front
seat head restraints, the ow of air from the
AIRSCARF vent is hindered.
This can cause AIRSCARF to overheat and be
damaged.
Do not use protective covers on head
#
restraints with AIRSCARF.
ARF vents
ents
Make sure that no objects are covering the air
inlet grille on the back of the head restraints.
You can adjust the blower setting of AIR-
#
SCARF vents
1
using the AIRSCARF button
(
page 117).
/
You can adjust the height of AIRSCARF vents
#
1
and the current of air by adjusting the
height of the head restraints (
page 111).
/
Advertisement
Table of Contents
