Table of Contents
Advertisement
160 Driving and parking
160
Always secure the engine against unin-
#
tentional starting before carrying out
maintenance or repair work.
R R eq equir uirements:
ements:
Park position j is selected.
R
The anti-the alarm system is not activated.
R
The hazard warning light system is switched
R
o .
The bonnet is closed.
R
The doors are closed and locked.
R
The windows and so top are closed.
R
Start the vehicle using the smartphone.
#
A er every engine start, the engine runs for
ten minutes.
You can carry out a maximum of two consecutive
starting attempts. You must start the engine with
the key before trying to start the vehicle again
with the smartphone.
You can switch o the vehicle at any time as fol-
lows:
Via the Smartphone App
R
By pressing the Ü or s button on the
R
key
%
Further information can be found in the
smartphone app.
Secur
Securing t
ing the v
he vehicle ag
ehicle agains
ainst st
t star arting bef
ing out maintenance or r
ing out maint
enance or repair w
epair wor ork: k:
Switch on the hazard warning light system.
#
or
Unlock the doors.
#
or
Open a side window or the so top.
#
R R unning-in not
unning-in notes es
To preserve the engine during the rst 1,500 km:
drive at varying road speeds and engine
R
speeds.
do not drive at speeds greater than
R
140 km/h.
allow the engine to reach a maximum engine
R
speed of 4,500 rpm only brie y.
drive the vehicle in drive program A.
R
shi to the next highest gear at the very latest
R
when the needle reaches the last third before
the red area in the rev counter.
do not shi down manually in order to brake.
R
avoid overstraining the vehicle, e.g. driving at
R
ting befor ore carry-
e carry-
full throttle.
do not depress the accelerator pedal past the
R
pressure point (kickdown).
only increase the engine speed gradually and
R
accelerate the vehicle to full speed a er
1,500 km.
This also applies when the engine or parts of the
drivetrain have been replaced.
Please also observe the following running-in
notes:
In certain driving and driving safety systems,
R
the sensors adjust automatically while a cer-
tain distance is being driven a er the vehicle
has been delivered or a er repairs. Full sys-
tem e ectiveness is not reached until the end
of this teach-in process.
Brakepads, brake disks and tyres that are
R
either new or have been replaced only achieve
Advertisement
Table of Contents
