Electro-Voice X-LINE ADVANCE Series Installation Manual page 45

X-LINE ADVANCE System Rigging & Transport
4.
5.
6.
7.
8.
9.
Electro-Voice
C
C
X12TE-GRID
Insert the attached quick-release pins (D).
Verify all quick-release pins are inserted completely through the sidearm and securely
locked in position.
Pull and twist two captive twist lock pins (E) on one side of the enclosure.
Two captive twist lock pins are locked in the retracted (open) position.
F
E
E E
F
E
X12TE-GRID
Guide one assembled sidearm (F) into the rigging bar channels until it is fully seated in
the V-blocks.
Keep a good grip on the sidearm until both pins are completely engaged through the
rigging.
Twist the two captive twist lock pins (G) to engage.
Two captive twist lock pins are unlocked in the engaged (closed) position.
G
G
X12TE-GRID
Repeat steps 6-7 on the opposite side of the enclosure.
The second assembled sidearm is attached to the element.
Verify the spreader bar is correctly oriented for the model of loudspeaker (X1, X2
elements or X12-125F subwoofer) being rigged.
D
D
E
G
G
Installation manual
Flying the system | en
C
C
X12-125F-GRID
E
F
E
F
E
X12-125F-GRID
G
X12-125F-GRID
2019-07 | 04 | F.01U.310.953
45
D
E
G