Electro-Voice X-LINE ADVANCE Series Installation Manual page 39

X-LINE ADVANCE System Rigging & Transport
Notice!
Dolly wheel (the 4°) hole:
i
The bottom element to be landed on the dolly base must be pinned in the 4° hole ( ) in the
ANGLE SELECT section. Compress the rear link bars until they contact the angle select pin
and lock by adding a second pin in the EVEN holes of the ANGLE LOCK section.
Ensure the two front link bars are lowered and locked.
Ground stack X1/X2 onto X12-125F in a mixed array
To ground stack X1/X2 onto X12-125F in a mixed array, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Secure the X1/X2 element to the X12-125F-DAK dolly adapter kit using the attached ball
11. Based on your mixed array configuration software report, set the angles on the remaining
12. Stack the elements together to complete your ground stack mixed array.
Refer to
–
–
Electro-Voice
Model your ground stack array in line array configuration software in order to determine
configuration angles of the elements to build your ground stack array.
Remove the X12-125F-DOLLY top dolly cover.
Install the X12-125F-DAK dolly adapter kit.
If recommended by line array configuration software, install the X12-125F-DOK dolly
outrigger kit. See Assembling an X12-125F-DOK dolly outrigger kit to an X12-125F-DOLLY,
page 29 .
Ensure the X12-125F-Dolly base is level, both front-to-back and side-to-side.
OR
If no outriggers are required, assemble the cardioid array on the dolly.
Set the configuration angle of the first subwoofer attached to the bottom dolly base.
If conventional subwoofer configuration is being used adjust the configuration angle on
the second subwoofer.
OR
If cardioid subwoofer configuration is being used, see Ground stacking subwoofers, page
33 .
Install the top dolly cover on the top subwoofer.
On the ground, set the configuration angle of the first X1/X2 element.
Place the first X1/X2 element onto the X12-125F DAK dolly adaptor kit.
detent pins.
X1/X2 elements.
Assembling an X12-125F-DOK dolly outrigger kit to an X12-125F-DOLLY, page 29
Ground stacking subwoofers, page 33
Installation manual
Ground stacking | en 39
2019-07 | 04 | F.01U.310.953