Table of Contents
Advertisement
X-LINE ADVANCE System Rigging & Transport
11. Verify the pin is pushed in all the way and the blue button is not depressed.
12. Insert a quick-release pin into the ANGLE LOCK hole on the other side of the element.
13. Verify both pins are pushed in all the way and the blue buttons are not depressed.
14. Repeat this process on all elements in the array setting the angles per the report from
Electro-Voice
Electro-Voice line array configuration software.
Installation manual
Rigging system | en
19
2019-07 | 04 | F.01U.310.953
Advertisement
Table of Contents
