Table of Contents
Advertisement
10
en | System overview
X-LINE ADVANCE System Rigging & Transport
All X-Line Advance elements are available in black and, except for the X12-128 subwoofer, are
supplied with the hardware necessary to interface one element to another.
Accessories:
Grids
The X-Line Advance grid options are sold separately. Consult Electro-Voice line array
configuration software for proper grid selection and array design.
X12TC-GRID: Standard compact grids for up to 24 X1 or X2 elements for simple or mostly
straight arrays, where extreme tilt angles are not required.
X12TE-GRID: Extended grids for up to 24 X1 or X2 elements for extreme down angles in small
to medium arrays and typical up or down angles in large arrays.
X12PU-BGK: Pull up bottom grid kit for X1 or X2 elements. A pull-up kit is used when the
compression rigging method is being used with an array or when extreme down angles beyond
the capabilities of the extended grid are required.
X12-125F-GRID: Subwoofer grid is appropriate for subwoofer arrays where extreme up or
down angles are not required. It is rated for a maximum hang of up to 18 X12-125F
subwoofers in a single column. Use Electro-Voice line array configuration software to
determine if X12-125F-GRID combined with the number of subwoofer elements will achieve
the acoustical coverage in the venue at a safe working load.
X12-125F-AG: Adapter grid to attach up to nine X1 or X2 loudspeakers (depending on the array
configuration) under X12-125F subwoofer as a mixed flown array.
X12-125FPU-BGK: Pull up bottom grid kit for X12-125F elements. A pull-up kit is used when
the compression rigging method is being used with an array or when extreme down angles
beyond the capabilities of the extended grid are required.
X12-125F-CGK: Cardioid grille kit may be used to hide the back of the X12-125F subwoofer
when it faces the audience in a cardioid subwoofer group.
Dollies
The X-Line Advance dolly options are sold separately.
X12T-DOLLY is used for transporting X1 or X2 loudspeaker systems. The dolly accommodates
two columns of X1 or X2 elements stacked three high for transportation (a total of six systems
per dolly). Systems are secured to the dolly via their rigging. A rigid top cover provides a solid
surface for stacking and two dolly side panels provide protection for speaker grilles. The dolly
may also be used as a wheeled ground stack platform or the dolly cover as a stationary ground
stack platform.
X12-125F-DOLLY is used for transporting X12-125F subwoofers. The dolly will accommodate
one column of X12-125F subwoofers stacked two high when both subwoofers are facing
forward or three high when in cardioid configuration (two forward facing and one backward
facing) for transportation. The subwoofers are secured by the integrated rigging system for
additional protection during transport. The X12-125F-DOLLY top cover is designed to accept
the X12-125F-DAK dolly adapter kit which allows a small mixed array of X1 or X2 loudspeakers
and X12-125F subwoofers to be assembled as a ground stack.
2019-07 | 04 | F.01U.310.953
Electro-Voice
Installation manual
Advertisement
Table of Contents
