Electro-Voice X-LINE ADVANCE Series Installation Manual page 42

42 en | Flying the system
3.
4.
5.
6.
7.
2019-07 | 04 | F.01U.310.953
Twist the two captive twist lock pins to engage.
Two captive twist lock pins are unlocked in the engaged (closed) position.
Forward
Repeat steps 1-3 on the opposite side of the loudspeaker.
The loudspeaker now has two side arms attached.
Attach one spreader bar to the two sidearms using the hole locations from Electro-Voice
line array configuration software.
Forward
Verify the spreader bar is correctly oriented for the model of loudspeaker (X1 or X2)
being rigged.
Forward
Attach a 5/8-inch shackle to the hole labeled PICK HERE on the spreader bar.
Ensure the shackle is rated for overhead lifting.
OR
OR
Reverse
OR
Installation manual
X-LINE ADVANCE System Rigging & Transport
Reverse
Reverse
Electro-Voice