Safety; General Safety; External Antenna Restrictions; Intended Use - HMS Networks Anybus Wireless Bridge II CAN User Manual

Safety

2. Safety

2.1. General Safety

CAUTION
This equipment emits RF energy in the ISM (Industrial, Scientific, Medical) band. Make sure that all
medical devices used in proximity to this equipment meet appropriate susceptibility specifications
for this type of RF energy.
CAUTION
This equipment contains parts that can be damaged by electrostatic discharge (ESD). Use ESD
prevention measures to avoid damage.
CAUTION
This equipment is recommended for use in both industrial and domestic environments. For industrial
environments it is mandatory to use the functional earth connection to comply with immunity
requirements. For domestic environments the functional earth must be used if a shielded Ethernet
cable is used, in order to meet emission requirements.

2.2. External Antenna Restrictions

For models with external antenna, only use antennas that are certified for use with this equipment.
Using external antennas that are not certified for use with this equipment will invalidate its certifications and
make it non-compliant with the regulations for radio equipment.
A list of certified antennas can be found at www.anybus.com/support.

2.3. Intended Use

The intended use of this equipment is as a communication interface and gateway. The equipment receives and
transmits data on various physical levels and connection types.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
SCM-1202-184 2.0
® ™
Anybus Wireless Bridge II CAN
Page 3 of 72