General Information; Intended Use Of The User Manual; General Safety Information; Admonition Messages And Symbols - HMS Networks Intesis INKNXMBM1000200 User Manual

Modbus RTU Client to KNX TP Gateway

2. General Information

2.1. Intended Use of the User Manual

This manual contains the main features of this Intesis gateway and the instructions for its appropriate
installation, configuration, and operation.
The contents of this manual should be brought to the attention of any person who installs, configures, or
operates this gateway or any associated equipment.
Keep this manual for future reference during the installation, configuration, and operation.

2.2. General Safety Information

IMPORTANT
Follow these instructions carefully. Improper work may seriously harm your health and damage the
gateway and/or any other equipment connected to it.
Only technical personnel, following these instructions and the country legislation for installing electrical
equipment, can install and manipulate this gateway.
Install this gateway indoors, in a restricted access location, avoiding exposure to direct solar radiation, water, high
relative humidity, or dust.
All wires (for communication and power supply, if needed) must only be connected to networks with indoor
wiring. All communication ports are considered for indoor use and must only be connected to SELV circuits.
Disconnect power wires before manipulating and connecting them to the gateway.
Respect the expected polarity of power and communication cables when connecting them to the gateway.

2.3. Admonition Messages and Symbols

DANGER
Instructions that must be followed to avoid an imminently hazardous situation that, if not avoided,
will result in death or severe injury.
WARNING
Instructions that must be followed to avoid a potentially hazardous situation that, if not avoided,
could result in death or severe injury.
CAUTION
Instruction that must be followed to avoid a potentially hazardous situation that, if not avoided,
could result in minor or moderate injury.
IMPORTANT
Instruction that must be followed to avoid a risk of reduced functionality and/or damage to the
equipment or to avoid a network security risk.
Page 2 of 20
General Information
USER MANUAL Version 1.0