Service - Saeco Group 500 Instruction And Maintenance Manual

- When requested if you want to change the
code, press ENTER;
- The old code will be displayed;
- Use the keys “+”, “-“ “number” to compose
the new code;
- Confirm using ENTER on completion.
TEMPERATURE
This menu permits the regulation of the
operating temperature of the coffee boiler and
the instant drinks boiler in models with double
boilers.
By pressing ENTER, the following appears for
example:
“Temp. H 0 Coff. 087”
2
by pressing ENTER once again, the following
appears:
“Temp. H 0 Inst. 084”
2
by using the keys “+”, “-“ and “number” you can
increase or decrease the temperature of the
water in the respective boilers.
In any event the machine is provided with safety
limits so that the maximum temperature values
set do not exceed these limits.
DATA FOR MDB
This menu appears when the MDB-ICP(YES)
option is included and enables the relevant
payment configuration
By pressing ENTER the following is displayed:
“maximum change”
“coin change”
“coins allowed: from 1 to 16”
“banknotes allowed: from 1 to 16”
MDB TUBES LOADING
This menu appears when the MDB-ICP(YES)
option is included and enables the filling of the
“change return” tubes of the coin box.
By pressing ENTER the following is displayed:
“Key 3 to end”
Now it is possible to insert the coins in order to
load the “change return” tubes; once the
operation has been completed, press key 3 to
exit.
MDB TUBES UNLOADING
This menu appears when the MDB-ICP(YES)
option is included and enables the emptying of
the “change return” tubes of the coin box.
By pressing ENTER this is displayed:
“T3 for coins from 1 to 16”

8 - SERVICE

The service (maintenance) functions are
accessed by pressing the service button (key
2) on the CPU board as indicated in figure 59.
“SERVICE” appears on the display
In the service mode the keys of the external
keypad identify the functions illustrated in
drawing 61, i.e.:
•
TEST WITHOUT SUGAR: after pressing the
key it is possible to use the keypad as in
normal service so as to dispense any
selection without cup, sugar and spoon.
•
WATER TEST: after pressing the key it is
possible to use the keypad as in normal
service, so as to dispense any selection with
water only.
•
TEST: after pressing the key it is possible to
use the keypad as in normal service so as to
dispense any complete selection (counted as
test dispensing).
F
Attention
To cancel a test pre-selection without
dispensing drinks you have only to press the
service key once again.
In this case the distributor will remain in
SERVICE mode.
English
37