Function Description - Saeco Group 500 Instruction And Maintenance Manual

English
7.1

Function description

TIME-DOSES
This menu allows access to the water and
product powder dose settings for each available
drink.
By pressing ENTER once, this appears on the
display:
“Key 01 coffee”
Pressing ENTER again, you can start the dose
setting operation for the first selection:
“water 065”
to indicate the water dose.
Using the keys “+”, “-“, “number”, the values of
the water dose related to the espresso coffee of
selection No. 1 can be changed.
By pressing ENTER again, the dose set is
confirmed and the subsequent setting, if any,
appears on the display (in case of instant
SELECTIONS, the powder) otherwise the
program returns automatically to the starting
point; this appears on the display:
“Key 01 coffee”
using the key “+” you can scroll through the
menu and choose the next selection to be
changed.
Below is the combination of the keys and
selections indicated in programming:
Key 01 = strong coffee
Key 02 = long coffee
Key 03 = coffee with milk
Key 04 = cappuccino
Key 05 = cappuccino with chocolate
Key 06 = milky coffee
Key 07 = moccaccino
Key 08 = milk
Key 09 = normal tea
Key 10 = normal tea with milk
Key 11 = lemon tea
Key 12 = milk and cocoa
Key 13 = chocolate
Key 14 = thick chocolate
Key 15 = chocolate and milk
32
Key 16 = hot water + cup
Key 17 = cup
Key 21 = strong decaffeinated coffee
Key 22 = long decaffeinated coffee
Key 23 = decaffeinated coffee with milk
Key 24 = decaffeinated cappuccino
Key 25 = decaffeinated capp-choc
Key 26 = milky decaffeinated coffee
Coffee unit time-out:
maximum activation time of the coffee unit motor
(we advise you not to change it)
Sugar time:
time for the maximum sugar dose
Extra sugar time:
time for the extra sugar dose
Extra milk time:
time for the extra milk dose
Grinder time-out:
maximum grinding time
The water control of both espresso coffee and
instant occurs by means of a volumetric counter.
The dosage of instant product powders is
expressed in seconds.
PRICES
Up to 10 prices are available and individually
applicable to each selection.
Press Enter to access the price table
programming; this appears on the display:
“Price 0 0000”
The vending prices are set using the same
procedure used for the dose setting i.e. using
the keys “+”, “-“, “number”.
For free vends, all that has to be done is set the
vending price to zero.