Cleaning The Parts In Contact With Foodstuffs - Saeco Group 500 Instruction And Maintenance Manual

- when the hydraulic circuit has been filled, the
heating stage begins which automatically
activates the heating elements of the boilers.
F
Important
When the boiler is completely filled, carry out
several cleansings of the mixer in order to
remove possible residues in the hydraulic
circuits.
NB: To enable dispensing tests or cleansings,
see the use of the pushbutton panel in “Service”
mode (fig.41).
fig.41
- After having performed these operations, wait
about ten minutes until the operating
temperature is reached.
6.5.3 Cleaning the parts in contact with
foodstuffs
With the distributor switched on, perform several
cleansing cycles of the mixers pressing the
buttons according to the matters described in
the service functions so as to eliminate any
residual dirt from the coffee boiler and the instant
product boiler.
- Wash your hands carefully.
- Prepare a chlorine based anti-bacterial
cleaning solution (products that can be
purchased in chemists) following the
strengths given on the product instruction
labels.
- Remove all the product containers from the
distributor (fig.42).
fig.42
- Remove the lids and product chutes from the
containers (fig. 43). Immerse all items into
the solution previously prepared.
fig.43
English
21