Saeco Group 500 Instruction And Maintenance Manual page 35

Multi-vend 2 = option to visualise the remaining
credit for 3 minutes (Y) or re-set it (N) at the end
of the drink dispensing
Clock = enables the clock (by kit)
Language = language used for displaying all
messages (possibility of choosing between two
stored languages)
Decimal point = display of the amount with the
decimal point
TO pump = enables a maximum operating time
of 40 seconds (S) or 120 seconds (N) of the
espresso pump
Cleansing = enables the automatic cleansing
(available with the clock device)
Cleansing cycle = enables, without expansion
boards, a cleansing of the mixers 30 minutes
after the machine has been switched on.
A second cleansing cycle will follow if no drinks
are dispensed within the following 6 hours; at
this point the cleaning time restarts from the last
drink dispensed. Consequently, one mixer
cleaning per day is guaranteed.
Freeze dried product pre-heating = enables the
pre-heating function of the hydraulic circuit for
selections with freeze dried coffee. Each time a
drink is requested with freeze dried coffee, the
machine carries out a hot wash with 30cc of
water.. This wash is not carried out if, during the
previous 3 minutes, a freeze dried selection has
been made.
Milk pre-heating = enables the pre-heating
function of the hydraulic circuit for selections with
coffee with milk. Each time a drink is requested
with coffee with milk, the machine carries out a
hot wash with 30cc of water.. This wash is not
carried out if, during the previous 3 minutes, a
selection with milk has been made.
Cleaner * = step-down counter, with indication
for the water softener resin regeneration
Grinder * = step-down counter, with indication
for the replacement of the grinder
Filters * = step-down counter, with indication for
the coffee filter regeneration
*
(In any event, does not stop the distributor operation)
Code = new programming access code
English
35