Table of Contents
Advertisement
English
INCLUDE-SELECTIONS
This function allows the operator to exclude the
unwanted selections (from Key 01 to Key 26),
making them unavailable.
By pressing ENTER once, this appears on the
display:
“INCLUDE key 01 = Y”
using the keys “+” and “-“, the desired option is
selected: ENTERING “N” THE SELECTION IS
EXCLUDED.
Press ENTER again to confirm the value and
go ahead to the next selection.
OPTIONS
This function makes a series of options available
in sequence as listed below; press ENTER to
access the sub menu that visualises the first
option.
For each OPTION it is necessary to set the
logical status “Y” or “N” that does or does not
enable the function.
By using the keys “+” and “-“, you change logic
values, i.e. the status, from “yes” (Y= enabled)
to “no” (N= disabled); using the keys “+”, “-“,
“number”, you change numeric values.
Pressing ENTER again, you confirm the pre-set
value and the next option is visualised on the
display; pressing PRG again, you return to the
“OPTIONS” menu.
Decaffeinated
1
= enables the freeze-dried coffee
pre-selection key
1
By setting “S” to this option, the lemon tea selection is
cancelled (both the lemon tea or decaffeinated option is
not possible)
Normal Tea = enables the normal freeze-dried
tea selections: “normal tea” and “normal tea with
milk” corresponding to the keys 11 and 12
34
Cup function = enables the cup exclusion pre-
selection key
Fresh ground = option for fresh-ground coffee
Spoon always = enables (Y) the spoon
dispensing for all types of selections (bitter and/
or instant)
Extra milk = enables the extra milk pre-selection
key
Motor delay = option to introduce a delay on the
instant powder motors
Milk first = option to dispense milk for coffee with
milk: first (Y) or after (N) the coffee
Validator = enables (Y) the connection to the
coin box-selector
Permanent credit
2
= option to visualise the credit
until it runs out (Y) (set the Multivend option to
Y)
2
(The two functions are related; entering “N” for the
Multivend option, any Permanent Credit operation will
automatically be void)
Executive = enables (Y) the executive coin box
(set Y also for the validator option)
Change giver = option to give the change (with
the system COGES and RUBBINI – SAECO
CARD, set Y)
ECS differentiated = to be enabled (Y) when the
COGES ECS system with differentiated prices
for keys-coins is used. Leave “N” with non-ECS
systems. It is not necessary to set the codes
241, 242, 243 etc. on the machine
PRICE HOLDING = enables (Y) for systems with
Price HOLDING protocol
BVD system = enables (Y) BDV coin boxes
(available with kit)
MDB- ICP system = enables (Y) MDB coin boxes
Master Slave = enables (Y) for Master/Slave
protocol, this option enables the functioning of
two machines with a single EXECUTIVE
payment system
Advertisement
Table of Contents
