Safety Standards - Saeco Group 500 Instruction And Maintenance Manual

English
- remove the polystyrene that blocks the
product containers (fig.24)
fig.24
D
Caution
The packing material must not be left
accessible to others, as it is a potential source
of danger. For the disposal contact qualified
companies.
14

5 - SAFETY STANDARDS

D :
- Before using the automatic distributor, read
this manual carefully.
- The installation and maintenance operations
must be performed exclusively by qualified
technical personnel.
- For no reason whatsoever must the operator
access those parts of the machine that are
protected by guards requiring special
instruments for their removal.
- Acquaintance and absolute respect, from a
technical point of view, of the safety standards
and danger warnings contained in this
manual, are fundamental for installing, using
and servicing the machine in conditions of
minimum risk.
Always disconnect the POWER CABLE before
maintenance or cleaning activities.
Do not, under any circumstances, intervene on
the machine or remove safety guards before hot
parts have cooled!
- Operating reliability and the efficiency of the
machine’s performance are guaranteed only
if original parts are used.
- The automatic vending machine is not
suitable for outside installation. The machine
must be installed in dry locations, with
temperatures of no lower than 1°C and it must
not be installed in places where cleaning is
done with water hoses (e.g. large kitchens
…).
- In order to guarantee regular functioning,
always maintain the automatic distributor
under perfect cleaning conditions.