Saeco Group 500 Instruction And Maintenance Manual page 10

Table of Contents

Advertisement

English
The instant product gear motor activates the
helicoidal screw conveyor so as to dispense
the programmed quantity of product into the
mixer (fig.12).
fig.12
Once the pre-set quantity of water and
powder is dispensed, the motor-mixer is
switched off.
ESPRESSO COFFEE
This process occurs after dispensing cup, sugar
and spoon.
The grinder is activated until it produces the
dose of ground coffee set by the doser
(fig.13).
fig.13
The doser electromagnet is activated,
causing the opening of the door and the
consequent drop of the coffee into the brew
chamber (fig.14).
10
fig.14
The rotation unit gear motor starts-up, brings
it into the dispensing position and
simultaneously compresses the ground
coffee (fig.15).
fig.15
The pump that delivers the required amount
of water -controlled by a special electronic
device (volumetric counter)- starts up,
withdrawing the water from the coffee boiler
(fig.16).
fig.16

Advertisement

Table of Contents
loading

Table of Contents