Table of Contents
Advertisement
- Make sure there are no lumps; avoid
compressing the product or using an
excessive quantity, to avoid ageing. We
suggest filling the containers with the quantity
of product needed for the consumption
estimated within two subsequent loadings
(fig.48))
fig.48
Check the capacity of each container in the
TECHNICAL SPECIFICATIONS section.
6.6.2
Label insertion
- The labels indicating the product selections
must be inserted in the special slots according
to the order indicated (see fig. 60).
Perform the operation as follows:
- Remove the cup dispenser(fig. 49).
fig.49
- Insert the labels in the order according to the
selections used on the vending machine (Fig.
50).
- Re-assemble the cup dispenser.
fig.50
English
23
Advertisement
Table of Contents
