Storage; Packaging; Receipt - Saeco Group 500 Instruction And Maintenance Manual

English
F
Attention
Avoid :
- lifting the distributor with ropes or presses
- dragging the distributor
- turning over or laying the distributor down
during transport;
- jolting the distributor
With regard to the distributor, avoid :
- bumping it
- overloading it with other packages
- exposing it to rain, freezing weather or
sources of heat
- keeping it in damp places
4.2

Storage

In the event of storage, avoid placing several
machines one on top of another, maintain it in a
vertical position, in dry places with temperatures
of no lower than 1° C.
fig.19
12
4.3

Packaging

The distributor is protected by polystyrene
angles and by a transparent polypropylene film
(fig.19).
The automatic distributor will be delivered
packaged, assuring both a mechanical guard
and protection against damage from the outside
environment.
Labels are applied on the packaging, indicating:
- handle with care;
- do not turn upside-down;
- protect from the rain;
- do not place one on top of another;
- protect from sources of heat;
- not bump resistant;
- type of distributor and serial number.
4.4

Receipt

Upon receipt of the automatic distributor, it is
necessary to check it has not suffered damage
during transport. If damage of any kind is
noticed, place a claim with the forwarder
immediately.
F
Attention
On conclusion of transport, the packaging
must be integral which means it must not:
- present dents, signs of bumps, distortions or
breakages to the external packaging;
- present wet zones or signs that could lead
one to suppose that the packaging has been
exposed to rain, freezing weather or heat;
- present signs of tampering.