INSTALLING THE AILERON SERVOS.
Servos
.
1) Install the rubber grommets and brass
collets onto the aileron servo. Test it the
servo into the aileron servo mount.
Because the size of servos difer, you may
need to adjust the size of the precut openingin
the mount. he notch in the sides of the mount
allow the servo lead to pass through.
2) Using a small weight (Weighted fuel pick-
up works well) and thread, feed the string
through the wing as indicated.
Small weight
.
Thread
3) Attach servo lead to the aileron servo. At-
tach the string to the servo lead and carefully
thread it though the wing. Once you have
thread the lead throught the wing, remove
the string so it can use for the other servo
.
lead.
.
Electric wire.
Thread.
41