Table of Contents
Advertisement
Master Scale Kit Edition Classic Ugly Stick 70.9"
24.
- Use the white glue at the edge of air-
foil, leading edge for applying the sheet
WSH1 and then itted to the top of the
wing panel using the same method as
in repeat for the WSH2 (bottom side of
wing ). Your wing panel should now look
like picture.
25.
26.
14
- he wing sheet of trailing edge.
- Locate the trailing edge sheeting. Use
white glue to secure the trailing edge
sheeting WSH8 (x2) at both sides.
27.
28.
WSH8
- Use white glue at airfoil edge ( W1 ~
WSH8
W3) to apply the sheet WSH5 ( bottom
wing sheet ) as shown. And then Insert
Balsa Block - Center Section Trailing
Edge- to Trailing edge for the mount of
bolt.
29.
Instruction Manual.
WSH5
Center section trailing edge
WSH6
WSH7
Advertisement
Table of Contents
