Master Scale Kit Edition Classic Ugly Stick 70.9"
7) Repeat this process with the other wing
panel, securely hinging the aileron in place.
8) Ater both ailerons are securely hinged,
irmly grasp the wing panel and aileron to
make sure the hinges are securely glued and
cannot be pulled out. Do this by carefully ap-
plying medium pressure, trying to separate
the aileron from the wing panel. Use caution
not to crush the wing structure.
Note :
Work the aileron up and down sev-
eral times to "work in" the hinges
and check for proper movement.
INSTALL THE AILERONS
CONTROL HORN.
Aileron control horn.
40
Instruction Manual.
WING ASSEMBLY.
Please see below pictures.
Epoxy.
Attach the aluminum tube into wing.