Table of Contents
Advertisement
Operating staff:
Operating staff has undergone an induction by the oper-
ator about the entrusted tasks and potential hazards re-
sulting from improper behaviour. Operating staff shall ex-
clusively be permitted to carry out any tasks beyond
operation in normal mode if this has been specified in the
operating instructions and operators have explicitly en-
trusted operating staff with the task.
Qualified electrician:
Due to the electrician's specialised training, know-how,
experience and knowledge of pertinent standards and
regulations the electrician is in a position to work on the
electrical systems, and autonomously identify and avoid
potential hazards.
Specialist staff:
As a result of specialist training, expertise, experience
and skills in terms of the relevant standards and regula-
tions, specialist staff is able to complete the tasks they
are entrusted with and independently identify hazards
and avert risks.
Manufacturer
Certain work must be carried out by manufacturer spe-
cialist staff only. Other staff is not permitted to carry out
this work. Contact our customer service to have the work
carried out.
2.4 Personal Protective Equipment
Personal protective equipment is intended to protect the
health and safety of persons at work. Staff must wear the
personal protective equipment indicated in individual
sections of these operating instructions when carrying
out the different tasks on the machine.
The personal protective equipment is described in the
following section:
Hearing protection
Hearing protection protects against hearing damage
caused by noise.
Head protection
Hearing protection protects against hearing damage
caused by noise. The industrial helmet protects the
head against falling objects and bumping into statio-
nary objects.
KGZ Series | Version 2.02 | EN
Protective eyewear
Protective goggles are intended to protect the eyes
from flying parts
Protective gloves
Protective gloves are intended to protect the hands
from components with sharp objects as well as fric-
tion, abrasion, and deep-cut injuries.
Safety boots
Safety shoes protect feet from pinching, falling parts
and slipping on slippery surfaces.
Protective clothing
Protective clothing is tight-fitting work clothing without
protruding parts, usually with a low tear resistance.
2.5 Safety Labels on the Chop- and
Mitre Saw
The following safety labels identifications are attached to
the chop- and mitre saw (Fig. 1) and must be observed.
3
1
2
6
7
8
Fig. 1: Safety labels:1 General mandatory sign |
2 Read operating instructions | 3 Use eye protection I 4 Dis-
connect mains plug I 5 Warning of electrical shock | 6 Use ear
protection | 7 Use protective gloves I 8 SUse safety boots I 9
Warning of laser beam 10 Warning of danger due to rotating
saw blade
If safety labels on the machine are damaged or missing,
this can cause errors, personal injury and material da-
mage. The safety symbols attached to the machine must
not be removed. Damaged safety symbols must be re-
placed immediately.
As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped
until new signs have been attached.
Safety
5
4
10
9
5
Advertisement
Table of Contents
