Table of Contents
Advertisement
WARNING!
Danger in case of misuse!
A misuse of the machine can result in dangerous
situations.
- Only operate the chop- and mitre saw in the power
range given in the technical specifications.
- Never pypass or override the safety devices
- Never work up other materials that do not corre-
spond to those which are required for the intended
use.
- Only operate the chop- and mitre saw in a technical
flawless status.
Proper use also includes compliance with all information
in this manual.
For structural and technical changes to the chop- and
mitre saw the company Stürmer Maschinen GmbH assu-
mes no liability Claims of any kind due to damage due to
improper use are excluded
Not intended use
Not intended use may result in fire, electric shock and
personal injury.
The provisions contained in this warranty are not inten-
ded to limit, modify, void, refuse or exclude any implied
warranties set forth in applicable state or federal laws.
Residual risks
Even if you use this electric tool as intended, certain resi-
dual risks cannot be excluded. The following hazards
may occur in connection with the design and construc-
tion of this equipment:
1. Lung damage if a suitable dust mask is not used.
2. Damage to hearing if suitable hearing protection is not
used.
3. Damage to health caused by hand-arm vibration when
the device is used for an extended period of time or is
not properly guided and maintained.
WARNING!
This product generates an electromagnetic field
during operation! This field may interfere with active
or passive medical implants!
To reduce the risk of serious or fatal injury, we recom-
mend that individuals with medical implants consult
their physician and the manufacturer of the medical
implant before using this product!
KGZ Series | Version 2.02 | EN
4
Technical Data
4.1 Table
Model
Length (Product) [mm]
Width / Depth (Product)
[mm]
Height (Product)
[mm]
Weight (Netto)
[kg]
Motor output
[W]
Electrical connection [V]
Ø Suction socket [mm]
Current type
Mains frequently [Hz]
Connecting cable length
[m]
Saw blade speed [rpm]
Diameter of saw blade
[mm]
Cutting capacity for angle/mitre (height x width)
[mm]
at 0° bevel /
0° mitre
at -45° bevel / 0° mitre
at +45° bevel / 0° mitre
at 0° bevel / -45° mitre
at -45° bevel / -45° mitre
at +45° bevel / +45° mitre
Sound pressure level
[db (A)]
Sound power level
[db (A)]
Vibration emissions [m/s²]
The stated total vibration value has been measured ac-
cording to one standard test method and can be used to
compare one tool with another.The stated total vibration
value can also be used as a preliminary assessment of
the load.The vibration emission of the power tool during
actual use may differ from the specified peak value. This
depends on the way the tool is used.
Technical Data
KGZ 210 E
KGZ 255 E
650
900
450
550
430
430
10,5
17
1500
1800
230
230
32,5
36
AC
AC
50
50
2
2
4500
5000
210
255
220*70
315*90
155*70
215*90
155*70
215*90
220*35
315*40
155*35
215*40
155*35
215*40
93,6
94,7
106,6
107,7
4,58
11
Advertisement
Table of Contents
