Table of Contents
Advertisement
Transport, Packaging and Storage
Avoid of the vibration risk:
1) Use protective gloves during the operation
2) Limit operation time and shorten the trigger time
Noise information
Wear hearing protection!
Measured sound values determined according to EN
62841-1.
The stated noise figures are emission values and not al-
ways safe working levels.
While there is a correlation between emission and expo-
sure levels, it can not be reliably used to determine if
further precautions are needed.
Factors that influence the actual exposure of the work-
force include the characteristics of the workspace, the
other sources of noise, and so on, i. the number of ma-
chines and other adjacent processes and the length of
time an operator is exposed to the noise.
The permissible exposure level may also vary from
country to country. However, this information will allow
the user of the machine to better assess the hazard and
risk.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, li-
mit the time of operation, use low-vibration and low-noise
operating modes as well as wear personal protective
equipment.
Take the following points into account to minimize the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct application tools for the product and en-
sure they in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instruc-
tions and keep it well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration
tool use across a number of days
12
4.2 Type Plate KGZ 210 E
Fig. 2: Type plate KGZ 210 E
5
Transport, Packaging and Sto-
rage
5.1 Delivery and Transport
Delivery
After delivery, check the chop- and mitre saw for visible
transport damage. If you discover any damage to the
cross-cut and mitre saw, report it immediately to the
transport company or dealer.
Transport
CAUTION!
Injuries caused by parts falling over or off a forklift,
pallet truck or transport vehicle.
Only use means of transport that can carry the total
weight and are suitable for it.
Improper transport of individual devices, unsecured de-
vices stacked on top of each other or next to each other
in packed or already unpacked condition is accident-
prone and can cause damage or malfunctions for which
we do not grant any liability or guarantee.
Transport the scope of delivery secured against shifting
or tilting with a sufficiently dimensioned industrial truck to
the installation site.
General risks during internal transport
CAUTION: DANGER OF TIPPING!
The device may be lifted unsecured by a maximum
of 2cm.
Employees must be outside the danger zone, the
reach of loads. Warn employees and, if necessary,
advise employees of the hazard.
KGZ Series | Version 2.02 | EN
Advertisement
Table of Contents
