Seagull Models Aviat A-1C Christen Husky 80 Assembly Manual page 21

ELECTRIC POWER CONVERSION
Locate the items neccessary to install
the electric power conversion included
with your model.
1.
Recommend the items necessary to in-
stall the electric power conversion parts
included with your model.
- Motor: 90 - 1800 Watts
- Propeller: 16x8 ~ 18x8
- ESC: 85A
- 6S- 8S Lipo
Attach the electric motor box to the
irewall suitable with the cross lines
drawn on the electric motor box and ire-
wall. Using epoxy and balsa stick to se-
cure the motor box to the irewall. Please
see pictures below.
2.
3.
M4x20mm and washers
Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M4x20mm hex head bolts to se-
cure the motor. Please see picture shown.
4.
5.
hen, use 5.5mm drill bit to enlarge the
holes on the electric motor box.
6.
4 mm
5.5mm
21