Intelligent Control - Grandstream Networks WP820 User Manual

g
(s) waggle until timeout.
Snooze Timeout Set the timeout value of snooze. You can choose snooze while in warning/alarm State. After the
(s) timeout, the phone will start detecting again.
Warning Timeout Set the timeout value of warning. The phone will start alarm if the phone keeps warning and not be
(s) canceled.
Panic Call Feature
Users can configure to have Panic Call feature on WP820 by setting it under WP820 LCD
settings �� SAFE/Panic Call. This feature provides users the ability to manually/automatically trigger Alarm then initiate an
emergency call to call for help in case of a dangerous situation.
Manual use: Users can press and hold the multiple function key on the side of the phone to initial an emergency call
(Note: Users need to configure the multi-function button to have the function of "SAFE/Panic Call" under WP820 Web UI).
Please, refer to WP820 Administration Guide.
Automatic use: If SAFE monitoring feature has been enabled, Emergency call can be initiated automatically once the
phone detects the un-safe situation.
The following list is the list of options that can be configured for "Panic Call" feature under:
WP820 LCD �� Menu �� Settings �� Advanced settings �� SAFE/Panic Call:
Option Description
SAFE
Monitoring Configures "SAFE Monitoring Settings".
Settings
Panic Call To trigger alarm in a silent way during urgent or dangerous situation, configure the Panic Call silent alarm
Silent option to be on. The default setting is off. This setting will enable the phone to initiate an emergency call
Alarm silently. It is mainly used when it is not convenient to play an alarm in a dangerous environment.
Emergency To initiate Emergency Call, users need to set the emergency call number after turning on this feature. The
Call default setting is off.
Warning
Set the Warning tone.
Tone
Alarm Tone Set the Alarm tone.
WP820 GESTURE AND INTELLIGENT CONTROL

Intelligent Control

Intelligent Control options allow to automatically answer/hang up calls upon leaving charge/connecting to charger
respectively, you can also enable/disable proximity sensor.
To configure Intelligent Control options, follow instructions below:
On WP820 LCD Menu Settings, select Basic Settings �� Gestures�� Intelligent Control.
1. Set "Off-Cradle Pickup" to On, so that phone will automatically answer the call when leaving charge.
2. Set "On-Cradle hang up" to On, so that phone will automatically hang up the call when entering the charging state.
3. Set "Enable proximity sensor" to OFF, so that the LCD screen will not turn off during a call when handset is held near the
ear.
g
Table 14: SAFE Monitoring Settings
Table 15: Panic/Emergency Call Settings
p g
�� Menu �� Settings
p p
�� Advanced