Auto Answer - Grandstream Networks WP820 User Manual

Note:
To answer an incoming call during an established call, press Dial Key, or the Speaker Key, or the "Answer" softkey. The
incoming call is answered, and the original call is placed on hold.

Auto Answer

Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, the WP820 will automatically answer incoming calls using speaker mode.
To activate / deactivate the auto answer feature:
Using WP820 LCD Menu
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings
3. Select which account will be enabling the Auto answer feature.
4. Set "Auto–Answer" to "On" and configure the auto-answer mode and press "Save" button.
Note
The auto-answer icon will be displayed near of the account on the LCD screen when the Auto-answer feature is enabled on the
configured accounts as displayed on the following screenshot.
Using WP820 Web Interface
�� Call settings �� Auto answer.
Figure 50: Auto-answer on WP820
Figure 51: Auto-answer Idle Screen