User Login; User Logout; Phone Settings - Grandstream Networks WP820 User Manual

Note
A reboot is required for these settings to take effect.

User Login

Once the phone boots up with the Guest Login feature enabled users can follow these steps to login:
1. Press the dial button or press any numeric button.
2. The Guest Login page will be opened, and the user is asked to enter the Extension credentials.
3. Enter the Account ID, the SIP password and choose the Alias of the SIP server configured on the WEB GUI as mentioned
on steps above.
4. Set the "Expire parameter" to the number of hours this login will stay valid.
Note
When the "Expire" parameter is set to "Always" users are asked to enter the PIN code that was previously configured on the WEB
GUI.

User Logout

To logout from the Guest Login mode users can follow these steps:
1. On idle screen, press the Settings soft-key.
2. Select Logout.
3. Confirm the logout by pressing the Logout soft-key

PHONE SETTINGS

Figure 33: Guest Login Window
Figure 34: Guest Logout