Key Description - Grandstream Networks WP820 User Manual

Broadsoft
Broadsoft account.
XSI
Displays account status, system info, Network status and network statistics
Account status.
Network status:
Press to enter the sub menu for MAC address, IP setting information (DHCP/Static IP), IPv4 address, IPv6
address, Subnet Mask, Gateway; DNS server and VPN.
System Info:
Press to enter the sub menu for Running memory, Storage status, MAC address, System version, Recovery
Status
version, U-boot version, Kernel version, Hardware version, PN number, Country code and Running time.
Network Statistics:
Press to enter the sub menu for Network SSID, BSSID, IP address, Signal strength, Connection speed,
Channel, Frequency, Tx packets, Tx error packets, Tx error rate, Tx drop packets, Tx drop rate, Rx packets, Rx
error packets, Rx error rate, Rx drop packets, Rx drop rate.
Battery:
Displays the battery status and the battery usage details.
WP820 Keypad
The WP820 keypad can be used by tapping on an input field. WP820 keypad has 4 modes "ABCabc2", "ABC", "abc" and "123".
Default mode is "ABCabc2". Note: If the input field is accepting only digits, only "123" mode will be available.
"ABCabc2" Mode:
This mode allows to enter capital letters, small letters, digits, and symbolic characters.
Following table describes allowed characters for each key.
Key Description
1 . , ' ? ! " – 1
4 G H I g h i 4
7 P Q R S p q r s 7
* . , ' ? ! " – ( ) @ / : _ ; + % * = < > $ [ ] { } \ ~ ^ # | ` &
"ABC" Mode:
Figure 5: WP820 Keypad Modes
Key
2
5
8
0
Description Key Description
A B C a b c 2 3 D E F d e f 3
J K L j k l 5 6 M N O m n o 6
T U V t u v 8 9 W X Y Z w x y z 9
Space # Switch mode