Set Voice Mail Id; Play Voice Mail Messages - Grandstream Networks WP820 User Manual

someone else or receive and listen to voice mails via the handset

Set Voice Mail ID

There are 2 ways to set Voice Mail Feature Code, either using WP820 Handset Menu or Web Interface.
Note
The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if UCM6xxx as SIP server, the Voice
Mail Feature Code is *97
Using WP820 LCD Menu
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach VoiceMail tab.
Note
You can access the VoiceMail tab by long pressing on digit "1".
3. Select the desired account and configure the Voicemail ID number, then press "Save" softkey.
Using WP820 Web Interface
1. Access WP820 Web GUI Interface.
2. Go to Account �� General Settings �� Account Registration.
3. Configure Voice Mail Access Number.

Play Voice Mail Messages

Figure 69: LCD Menu – Voice Mail ID
Figure 70: Web UI – Voice Mail Access Number