Dialing From Call History - Grandstream Networks WP820 User Manual

Making calls require the use of SIP lines. So, you should first register the SIP account to the handset beforehand, after
registering the sip lines, you can choose between them while trying to make calls by pressing the "Accounts" button
displayed on the call screen. Please refer to the following methods to make calls using a line:
Method 1:
1. Enter the desired number using the keypad.
2. Toggle between the available lines by pressing the "Accounts" button to choose the line for making calls. (The account
name will change on the screen when press "Accounts" button).
3. Press Dial key
configuration) to initiate the call or wait for 4 seconds and the call will be initiated automatically.
Note: Users can also initiate calls with handsfree mode using Speaker key
key .
Method 2:
1. Press Dial key or Speaker key to enter the pre-dialing screen.
2. Toggle between available lines by pressing the "Accounts" button to choose the line for making calls. (The account name
will change on the screen when press "Accounts" button).
3. Enter the number to dial using the keypad.
4. Press Dial key
configuration) to initiate the call or wait for 4 seconds and the call will be initiated automatically.
5. To terminate the call, press Hang-Up key
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing operation by pressing
the on-hook key. During the call conversations, you can press the left and right navigation keys to adjust the volume. The call
duration is displayed on the LCD screen while the call is in progress and call summary will be displayed once the call is
terminated.
Notes:
To dial "+" please keep pressing "0" key for about 2 seconds.
To dial from contacts list, choose a contact using navigation keys and press Dial key
When having un-read voicemails on the WP820, once accessing the dialing interface a stutter tone will be heard to notify
users about voicemails that need to be read.
The maximum length of dialed digits is limited to 30 characters.

Dialing from Call history

Users may use their call history entries to initiate calls. Please refer to following steps:
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Call History.
3. Select the desired entry and press Dial key to establish the call.
, left softkey "Call", # (Use # as "Dial key" or "Redial key" must be configured in web
, left softkey "Call", # (Use # as "Dial key" or "Redial key" must be configured in web
.
. To terminate the call, press Hang-Up
.