Grandstream Networks WP820 User Manual page 63

Users could specify how often the phone will report IGMP when PTT/ Paging function is turned on. IGMP reporter help to
keep PTT/ Paging receivable in dormant state. The interval may take some effect to standby time. The default setting is 30 s.
SAFE/PANIC CALL
Safe Monitoring Features
SAFE monitoring feature on WP820 will monitor the user's safety situation and trigger an alarm once it detects any unsafe
situation. Once the phone detects that the user may be in a dangerous situation such as unable to move, fall, or being chased
using "Safe Monitoring Feature", the WP820 can quickly alert or initiate an emergency call for timely assistance.
In particular, the phone will automatically prompt a warning alert and message once it detects any unsafe situation. If the user
does not cancel the prompt warning message to confirm its safety within the set time, an alarm will be triggered and an
emergency call will be initialed (if configured) for assistance.
There are three major types of safety detection methods that can be set on SAFE monitoring settings:
No movement detection: It detects when the user may be unable to move because of an injury or a coma, etc. Users can
configure the duration of the no movement. If it stays no movement longer than the duration, the device will be triggered
for detection.
Tilt detection: It detects when the user may be in a state of slipping or falling, etc. Users can configure the sensitivity and
timeout for this detection. With higher sensitivity level on tilt status, a relative slight falling action will trigger tilt detection
and alert.
Running detection: It detects when user may be in a status of being chased or escaping from a dangerous environment.
Users can configure the sensitivity and timeout for this detection. With higher sensitivity level on running status, a slower
running speed will trigger the running detection.
Users could configure the following SAFE monitoring options under WP820 LCD
�� SAFE/Panic Call �� SAFE Monitoring Settings:
Option Description
Monitoring Turn on/off the SAFE monitoring feature.
No Movement Set the sensitivity of "No movement" detection. There are 7 levels available for detection. Choose
Sensitivity Disabled to stop No movement detection.
No Movement Set the timeout value for "No movement" detection. The phone will start warning if the phone keeps
Timeout (s) no movement until timeout.
Set the sensitivity of "Tilt detection". There are 7 levels available for detection. Choose Disabled to
Tilt Sensitivity
stop Tilt detection.
Set the timeout value for "Tilt detection". The phone will start warning if the phone keeps tilt until
Tilt Timeout (s)
timeout.
Running Set the sensitivity of "Running detection". There are 7 levels available for detection. Choose Disabled
Sensitivity to stop Running detection.
Running Timeout Set the timeout value for "Running detection". The phone will start warning if the phone keeps
Figure 90: IGMP setting
�� Menu �� Settings �� Advanced settings