Turn On/Off Bluetooth - Grandstream Networks WP820 User Manual

A message prompt also appears to notify users about poor Wi-Fi signal. While during the call, a beep tone will be played to
notify users that Wi-Fi connection is lost.
Wi-Fi Roaming Mode Configuration
Wi-Fi Roaming settings configuration can also be done by users under Settings��Network Settings��Wi-Fi Roaming Mode.
The options that can be configured under "Wi-Fi Roaming Mode" are the following:
Signal Threshold: When the Wi-Fi signal strength of the device drops below this value, the device will scan for a hotspot
above the threshold value and connect to it. The default setting is -70.
Good Signal Scan Interval: The time interval for signal scanning when the Wi-Fi signal strength is higher than the signal
threshold. The default setting is 600s.
Poor Signal Scan Interval: The time interval for signal scanning when the Wi-Fi signal strength is lower than the signal
threshold and there is no hotspot which is higher than the current signal strength. The default setting is 5s.
Connecting WP820 to Bluetooth Devices
Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances from fixed and mobile
devices, creating personal area networks with high levels of security. The WP820 supports Bluetooth version 4.2.
To connect to a Bluetooth device, turn on the WP820's Bluetooth radio first. The first time when using a new Bluetooth device
with the WP820, "pair" the device with WP820 so that both devices know how to connect securely to each other. After that,
users could simply connect to a paired device. Turn off Bluetooth if it is not used.
Bluetooth settings are under WP820's Settings��Network Settings��Bluetooth Settings.

Turn On/Off Bluetooth

1. Go to WP820's Settings��Network Settings��Bluetooth.
2. Turn On or Off the Bluetooth option.
Change Bluetooth Device Name
The WP820 uses "WP820_XXXXXX" as Bluetooth device name by default where "XXXXXX" are the last 6 digits of the phone's
Bluetooth MAC address plus 1. The device name will be visible to other devices when connecting them. Follow the steps
below to change the name:
1. Go to WP820's Settings��Network Settings��Bluetooth
2. Turn on Bluetooth.
3. Go to WP820's Settings��Network Settings��Bluetooth Settings.
4. Press "Device name".
5 Enter a name and tap on "Save"
Figure 16: Wi-Fi Roaming Mode