Adjusting Speaker And Earpiece Volume - Grandstream Networks WP820 User Manual

Note
If PTT/Paging button is customized by the administrator to be Mute/Unmute, users can press the Multi-function button to
Mute/Un-mute the MIC during calls.

Adjusting Speaker and Earpiece Volume

Press volume up and down keys on the left side of your phone while you are on an established call to set the volume of the
earphone / speaker. You can choose between 8 different levels. The default level is 4.
Ringtones
Setting the Ringer Volume on the WP820
To configure the desired ringer volume, proceed as follows:
1. Press Menu to bring up operation menu and go to Settings.
2. Navigate to Basic Settings, and then select Sound tab.
3. User can configure the silent and vibrate modes and also the voice ringtones by pressing the left and right arrow keys to
change repeatedly and set the desired volume.
4. Press "Back" (right softkey) to confirm the new configuration settings.
Notes:
15 levels are supported. Level 15 is the highest level. Level 8 is default.
appears when silent mode is enabled. In this mode no ring will be played for incoming calls.
Figure 36: Muting the Microphone
Figure 37: Ringer Volume