Gesture Control - Grandstream Networks WP820 User Manual

Gesture Control

Gesture Control options allow to perform actions (mute, decrease ringing volume, reject call...) based on the phone's gesture
such as "Flip Phone" or "Pick up".
Flip Phone
1. On WP820 LCD Menu Settings, select Basic Settings �� Gestures �� Gesture Control.
2. Tap on Flip Phone option and set the option needed when flipping the phone.
Ringing on Incoming Call:
Off: The feature is disabled even if the phone is flipped while receiving an incoming call.
Reject with SMS: Incoming call will be rejected, and pre-defined SMS will be sent to caller when flipping the phone
while receiving an incoming call. Note: SMS feature must be supported by SIP server, and users can customize SMS
content by entering the message under "Reply Content".
Reject: Incoming calls will be rejected when flipping the phone while receiving an incoming call.
Note
To flip WP820, when holding the phone up, put it down on his front side as shown in figure below.
Figure 91: Intelligent Control Features
Figure 92: Flip Phone