Table of Contents
Advertisement
nCounter Pro Analysis System User Manual
The 'Manage email addresses' screen will appear
(Figure 146).
Email addresses associated with a user profile are not
listed on this screen. Instead, use this screen to enter
additional email addresses without creating a user
profile. To delete an email address from the Digital
Analyzer, select that email address and press delete.
FTPS Setup
1.
To configure FTPS access to the Digital Analyzer,
select FTP on the 'System Setup' screen. The
'FTP
configuration'
(Figure 147). The default FTPS user name is set
to "technician." The user name cannot be
changed.
2.
To set or change the password at any time, press
the password button and type another password.
It will overwrite the existing one.
3.
To disable FTPS access to the Digital Analyzer,
press the enabled field so that it displays "no
(disabled)", and no FTPS access will be allowed.
NOTE:
Be aware that anyone with physical access to the Digital Analyzer can enable FTPS
or overwrite the password.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
94
screen
will
appear
Figure 146: The 'Manage email addresses' screen.
Figure 147: The 'FTP configuration' screen.
SEV-00184-01
Advertisement
Table of Contents
