Table of Contents
Advertisement
nCounter Pro Analysis System User Manual
12.
If the Enterprise Package has been configured
to require user login (see the
Package
section), then the screen will dim and
lock
automatically
(Figure 91).
Press the light grey unlock button to log in. The
screen will lighten (Figure 92), and the user
will be able to download data (while the run
continues) or pause the run.
The screen will lock again automatically if a
timeout period was established. Otherwise,
press the lock screen button to engage the lock
manually.
13.
The screen image in Figure 93 provides an
example of a completed run.
Button options during and after a run:
•
download data: Press download data to
access data that has already been collected
while the Digital Analyzer is still running or
after it has finished. For instructions on
downloading files, see
•
pause: Press pause during the run to pause
the run, to add additional cartridges, or to
abort the run. See
•
finish: Press finished when the run has
completed. Pressing this button will return the
application to the Main Menu.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
62
Enterprise
after
a
run
begins
Completing a
Run.
Pausing a Run
below.
Figure 91: The 'Counting Cartridge ID' screen
when it is locked.
Figure 92: The 'Counting Cartridge ID' screen
when it is unlocked, with the lock screen button
visible.
Figure 93: The 'Counting Cartridge ID' screen
with completed run information.
SEV-00184-01
Advertisement
Table of Contents
