Table of Contents
Advertisement
nCounter Pro Analysis System User Manual
9.
Select the samples field. The 'Select sample
tubes' screen will appear (Figure 76).
10.
Select the tubes for which sample information
will be entered by pressing the appropriate
tube on the screen. To select all tubes and
enter the same information for all, press the
select all button. Selected samples will be
highlighted in green. Press next to proceed.
The 'Sample tubes' screen will appear
(Figure 77).
IMPORTANT:
selected, the information entered will be
applied to all selected samples (in this case,
Sample tubes 1–3, as the top of the screen
indicates).
11.
On the 'Sample tubes' screen, the available sample definition fields are displayed. Select each
button or field to open a keyboard screen to enter data. Enter the following information for each
field and press enter to return to the sample tubes screen:
a. In the sample ID data field, enter a unique sample ID (if a single tube is selected).
b. In the owner ID data field, enter the owner ID.
c. In the comments data field, enter desired comments.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
56
When multiple samples are
Figure 76: The 'Select sample tubes' screen.
Figure 77: The 'Sample tubes' screen.
SEV-00184-01
Advertisement
Table of Contents
