SEV-00184-01
14.
The 'Notification Options' screen will appear
(Figure 31).
15.
Select the email addresses where error and
completion confirmation emails should be
sent. To add a new address, press add email,
type in the address, and press enter
(Figure 32). Finally, select whether the Prep
Station should make an audible alarm when
processing is finished. When all alerts have
been set, press next.
Figure 31: The 'Notification Options' screen.
Figure 32: The 'Enter email address' screen.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
nCounter Pro Analysis System User Manual
25