Table of Contents
Advertisement
SEV-00184-01
6.
The system will return to the 'Cartridge Information' screen (Figure 72).
7.
Press email to select an email address; if the
Enterprise
configurations
notifications.
The 'Select email address' screen will appear
(Figure 74).
Select an email address where the data from
the cartridge will be sent. If the Enterprise
Package is enabled, then the display name will
appear next to each email address and users
will have the option to select more than one
email address.
Data will be stored in the 'older data' section of the Digital Analyzer after being sent by email and
can be retrieved using a USB flash drive or FTPS if the instrument is correctly configured.
NOTE:
Email must be configured first for
email notifications to function. Selecting an
email address from this screen may be
possible, but no results will be sent if the
configuration is incorrect. To adjust email
settings, see the section on
8.
Press enter. The system will return to the
'Cartridge information' screen (Figure 75).
Package
is
enabled,
may
disable
System
Setup.
some
email
Figure 74: The 'Select email address' screen.
Figure 75: The 'Cartridge information' screen.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
nCounter Pro Analysis System User Manual
55
Advertisement
Table of Contents
