Table of Contents
Advertisement
nCounter Pro Analysis System User Manual
Abort a Run
When a run is aborted, data on cartridges and
lanes that have completed imaging are saved and
available for download.
1.
On the 'Counting Cartridge ID' screen, press
pause.
The 'Imaging Paused' screen will appear
(Figure 94).
2.
To abort the run in its entirety, press abort run.
The 'Abort Run' confirmation screen will appear
(Figure 95).
3.
Press yes to abort the run.
NOTE:
If the run is aborted but cartridges will be re-imaged, set up a new run with the same
cartridges following the instructions outlined above in
Abort a Cartridge
When a single cartridge is aborted, data on
cartridges and lanes that have completed
imaging are saved and will be available for
download.
1.
In the 'Counting Cartridge ID' screen, press
pause.
The 'Imaging Paused' screen will appear
(Figure 94).
2.
To abort the cartridge, but not the entire run,
press abort cartridge.
The 'Abort Cartridge' confirmation screen will
appear (Figure 96).
3.
Press yes to abort the cartridge.
NOTE:
If the cartridge is aborted but will be re-imaged, set up a new run with the same
cartridges following the instructions outlined above in
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
64
Figure 95: The 'Abort Run' confirmation screen.
Initiating a
Run.
Figure 96: The 'Abort Cartridge' confirmation
screen.
Initiating a Run.
SEV-00184-01
Advertisement
Table of Contents
