Table of Contents
Advertisement
SEV-00184-01
Modify an Existing CDF in Notepad
NOTE: To avoid errors in file content and format. this method is not recommended unless
necessary.
1.
Open the CDF in Notepad (or TextEdit). Note that all the information present in the Excel
spreadsheet is also visible in Notepad (Figure 62).
2.
Enter or change the information appropriate for the experiment:
Under <Header>
Do not alter any of the existing
text. Enter the cartridge ID and
user Email address after the
comma. Do not use spaces.
Under <Samples>
Do not alter the definitions in the
first line (LaneID, SampleID,
Owner,
Comments,
FOVCount, GeneRLF). Rather,
enter information on a new line.
The values for these definitions
must be separated by commas.
Do not use spaces.
IMPORTANT:
not be removed. If deleted, the file will not be read properly.
3.
Save the file with a ".cdf" extension.
Date,
Figure 62: A sample CDF viewed in Notepad.
All the commas in this file are necessary to separate data fields and should
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
nCounter Pro Analysis System User Manual
49
Advertisement
Table of Contents
