Retrofitting Of The Process Control Unit Intellitop; To The Pneumatic Svp Aseptic Change-Over Valve - Pentair BAA A390-D.03 Select Operating Instructions Manual

7.9.

Retrofitting of the process control unit IntelliTop

to the pneumatic SVP aseptic change-over valve

existing
actuator
VII.1. Unscrew centering screw (1) and remove adapter disk (2).
VII.2. Install adapter (3). Prior to assembly clean and grease the shafts and sliding surfaces. Grease the sealing ele-
ments before installation.
Lubrication plan
Apply R =
VII.3. Install contact button (5).
VII.4. Plug process control unit (4) onto adapter (3).
VII.5. Screw on the cap screw (6).
BAA A390-D.03
Select
Version 5.04
created on/by 22.03.2017
reviewed on/by 22.03.2017
SVP aseptic change-over valve, pneum. operated
DN 010 – 020, OD 0.50" – 0.75"; ISO 008 – 015
RENOLIT SI 410 M - at the periphery using a brush
Graf H.
Operating instructions
diaphragm – O-ring
®
2.0
existing
actuator
en
Copy of original operating instructions
31