Renewing Lettering And Badges At Rear - Volkswagen Tiguan 2016 Workshop Manual

Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
9.4

Renewing lettering and badges at rear

Note
When fitting the lettering, observe the fitting notes
Removing
– Before removing badge -1-, heat it with hot air blower - V.A.G
1416- .
– Lift VW emblem off rear lid.
– Remove existing adhesive residues with adhesive remains re‐
mover - VAS 6349- .
Installing
– Thoroughly clean bonding surface -4- immediately with adhe‐
sive residue remover before sticking on.
• Bonding surfaces -4- must be free of dust and grease and
there should be no adhesive residues.
– Pull off backing from adhesive tape on emblem -1-.
424
Rep. gr.66 - Exterior equipment
⇒ page 419