Assembly Overview - Door Handle And Door Lock; Removing And Installing Window Regulator Motor - Volkswagen Tiguan 2016 Workshop Manual

2.3

Assembly overview - door handle and door lock

Note
The illustrations show the left-hand side. The procedure for the right-hand side is basically the same.
1 - Door lock
❑ Removing and installing
⇒ page 206
2 - Bolt
❑ 1.5 Nm
❑ For locking bar in door
handle bracket.
3 - Bearing bracket
❑ Removing and installing
⇒ page 203
4 - Carrier
5 - Cover
❑ Removing and installing
⇒ page 195
6 - Door handle
❑ Removing and installing
⇒ page 200
7 - Bolt
❑ 1.5 Nm
❑ Bearing plate is loos‐
ened from door when
this bolt is loosened
8 - Bowden cable
❑ From door lock -1- to
door handle bracket -3-
9 - Bowden cable
❑ From inner door handle
to door lock -1-
❑ With grommet to pas‐
sage on cover.
10 - Cover
11 - Bolt
❑ Qty. 2
❑ 18 Nm
Note
The bolts are microencapsulated
and must be renewed each time
they are unscrewed.
2.4 Removing and installing window regula‐
tor motor
Special tools and workshop equipment required
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
185
2. Door components