Volkswagen Tiguan 2016 Workshop Manual page 35

1 - Bonnet (hood)
❑ Removing and installing
⇒ page 28
❑ Adjusting ⇒ page 34
2 - Seal on side
❑ Left and right
3 - Dampers
❑ Removing and installing
⇒ page 51
4 - Adjusting buffer
❑ Qty. 2
❑ Contact point for adjust‐
ing buffer is always pro‐
tected by protective film.
5 - Seal in centre
6 - Striker
❑ Removing and installing
⇒ page 46
7 - Hexagon nut
❑ Qty. 3
❑ 12 Nm
8 - Hexagon nut
❑ For securing bonnet
❑ Qty. 2 on each side
❑ 22 Nm
9 - Hinge
❑ Removing and installing
⇒ page 48
10 - Bolt
❑ For securing hinge
❑ Qty. 2 on each side
❑ 22 Nm
11 - Bolt
❑ Self-locking; must be renewed after each time it has been loosened
❑ Qty. 2
❑ 12 Nm
12 - Lid lock
❑ Removing and installing
13 - Gas strut
❑ Removing and installing
❑ Releasing gas ⇒ page 54
General body repairs, exterior - Edition 01.2018
⇒ page 40
⇒ page 53
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
27
1. Bonnet (hood)