♦ Bonding agent for plastics
♦ Cleaning solution
♦ Primer applicator
Installing brackets
Note
The brackets are installed after the bumper cover has been painted.
♦
Observe manufacturer's instructions enclosed in the packaging.
♦
Observe minimum curing period of 30 minutes.
♦
The markings for the bracket -1- can be found on the inside of the
bumper cover.
– The holes must be drilled from the inside to the outside with
the drill bit - VAS 6614/4- -3- from the supplied tool kit.
General body repairs, exterior - Edition 01.2018
⇒ Electronic Parts Cata‐
logue (ETKA)
⇒ Electronic Parts Cata‐
logue (ETKA)
⇒ Electronic Parts Cata‐
logue (ETKA)
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
297
2. Bumper, rear