Volkswagen Tiguan 2016 Workshop Manual page 310

Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
Stamping holes
Note
Stamping holes is described for the left side. The procedure for the right-hand side is basically the same.
♦
The park assist brackets are installed after the bumper cover has been painted.
♦
The contact surface of the park assist brackets must not be painted ⇒ Paintwork manual .
♦
The markings -1- for the park assist brackets can be found on the
inside of the bumper cover.
– Hole must be drilled from inside out with drill bit - VAS 6614/4-
-3- from tool kit supplied.
302
Rep. gr.63 - Bumpers