Volkswagen Tiguan 2016 Workshop Manual page 374

Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
Installing
Install in reverse order of removal, observing the following:
Follow installation instructions
– Check grommets -3- and clips -2- for damage, and renew them
if necessary.
– Push cover -1- from below onto door -5- -arrows a-.
– Press cover -1- with clips -2- into grommets -3- -arrows b-.
– Pull off protective film -6- from adhesive tape -7-.
– Press on cover -1- forcefully in area of adhesive tape sections
-7-.
– Tighten bolts -4- on inner side of door.
Specified torques
Component
Rear door moulding
366
Rep. gr.66 - Exterior equipment
⇒ page 361 .
Specified torque
2 Nm