Figure 7-1. Netgear Print Server Administration Program - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
To start the FirstGear Administration Program:
Click on Start, move along the program folders to highlight the FirstGear program
1.
folder, and then click on the Print Server Administration program.
As illustrated in
and searches the network for NETGEAR print servers.
Figure 7-1. NETGEAR Print Server Administration Program
All active NETGEAR print servers are listed on the screen as shown. If there is any print
server missing from the screen, you may click on the Browse button to scan the network one
more time. By default, the FirstGear Administration Program only browses the network with
NetBEUI to minimize unnecessary packets on the network.
If you still do not see all the print servers, the print server that you are trying to configure
might have the default NetBEUI protocol disabled. If the protocol is disabled, click on the
Protocol button to enable browsing with IPX/SPX and TCP/IP. Make sure that the IPX/SPX
and TCP/IP protocols are also enabled and bound to the network adapter card in your
Windows 95, Windows 98, Windows NT, or Windows 2000 system.
The Exit button ends the FirstGear setup utility.
7-2
Figure 7-1, the main screen of the FirstGear print server setup utility opens
Using Advanced Management Tools